Rhino 9300 - Novolac, Self Leveling, Epoxy Coating
Rhino™ 9300 - A Novolac Self Leveling Epoxy Coating that is a high quality Bis-F epoxy with superior chemical and abrasion resistance versus Bis-A type epoxy resins. This tightly cross-linked, self-leveling epoxy system cures in the presence of moisture and humidity with excellent mechanical properties. Rhino 9300 mixes using the industry standard, 2:1 by volume ratio. Having low odor, Rhino 9300 contains no solvents and is 100% solids that assures ease of application.
FEATURES & BENEFITS
- Superior chemical and abrasion resistance
- Medium viscosity
- Excellent bonding
- Highly resistant to cratering or blush
- Dries to a high gloss
- Low odor
- 100% solids, no solvents
- Cures in the presence of moisture and humidity with excellent mechanical properties
APPLICATIONS
- Recommended for floor coating and bermed secondary containment areas where high concentrations of chemicals are used
- Application where increased resistance to acids, bases and solvents is desired
- Non-slip surfaces can be achieved with broadcast of quartz, aluminum oxide or other non-skid material
APPLICATION PROPERTIES (AT 77°F / 25°C)
| Solids by Volume | 100% |
| Volatile Organic Content (VOC) | 0 lbs / gal |
| Mixing ratio | 2:1 by volume |
| Viscosity | 500-800 cps, mixed |
| Pot Life (neat coating) | 25-30 minutes |
| Application Temperature | 55°F minimum, 100°F maximum |
| Maximum Re-coat Time | 24 hrs. |
| Dry To Touch | 6-8 hrs. |
| Light Traffic | 14-16 hrs |
| Return To Service | 24-36-hrs. |
| Full Cure | 7 Days |
PHYSICAL PROPERTIES FOR CURED SYSTEM (CURED 7 DAYS AT 77°F (25°C)
| Hardness (Shore D) | 86±5 | |
| Tensile Strength (psi) | 7000-8000 | ASTM D-638 |
| Tensile Elongation (%) | 3.2 | ASTM D-638 |
| Flexural Strength | 13000 – 13800 | ASTM D-790 |
| Compressive Strength (psi) | 12000 – 14000 | ASTM D-695 |
| HDT (F) | 140 | ASTM D-648 |
| Water Absorp. (% gain) 24 hrs | <1 | |
| Bond Strength (psi) to concrete | >400, w/100% failure |
MIXING
A thorough and complete mixing is critical. First mix each component separately. Proportion each component at the ratio of 2 parts A (resin) to 1 part B (hardener) by volume or if using 1-gallon kits, pour all of Part B (hardener) into Part A (resin). Mix for 3 – 5 minutes, scraping the mixing container sides and bottom regularly. Mix no more material than may be applied in 20 minutes.
CHEMICAL RESISTANCE GUIDE (3 WEEK IMMERSION)
| Reagent | % Weight gain (loss) |
|---|---|
| Xylene | 0.0 |
| 1,1,1 Trichloroethane | 0.0 |
| EB (Ethylene Glycol Monobutyl Ether) | 2.4 |
| Water (deionized) | 1.2 |
| 10% Sodium Hydroxide | 0.0 |
| 10% Sulfide Acid | 0.0 |
| 10% Hydrochloric Acid | 0.1 |
| 10% Acetic Acid | 5.4 |
| Synthetic Gasohol | 0.0 |
| JP-4, JP-5, JP-7, JP-8 | 0.0 |
| Reagent | % Weight gain (loss) |
|---|---|
| Toluene | 2.3 |
| MEK | 2.3 |
| Ethyl Alcohol | 6.9 |
| 5% Detergent Solution | 0.0 |
| 50% Sodium Hydroxide | (0.2) |
| 70% Sulfuric Acid | 0.2 |
| 5% Acetic Acid | 2.6 |
| Skydrol | (0.03) |
| Mogas, Diesel | 0.0 |
| Diethylene Glycol Monomethyl Ether | 0.0 |